LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler X, Automatic >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Suspension System >> Rear >> Track Bar >> Installation

Track Bar: Installation

  1. Install the track bar in the axle bracket and install the bolt loosely.
  2. Install the track bar in the frame rail bracket and loosely install the bolt and nut.
    NOTE: It may be necessary to pry the axle assembly over to install the track bar.
  3. Remove supports and lower the vehicle.
  4. Tighten the track bar nut/bolt at both ends to 100 N.m (74 ft. lbs.).
scientia non olet · About LEMON Manuals