LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler X, Automatic >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Suspension System >> Rear >> Shock >> Installation

Suspension System: Rear: Shock: Installation

  1. Install the shock absorber on the upper frame rail and install mounting bolts.
  2. Tighten the upper bolts to 31 N.m (23 ft. lbs.).
  3. Install lower bolt and nut finger tight.
  4. Remove the supports and lower the vehicle.
  5. Tighten the lower nut to 100 N.m (74 ft. lbs.).
scientia non olet · About LEMON Manuals