4.7L V-8

WARNING: This page is about a different car, the 2005 Dodge Pickup and 2005 Dodge Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: MAP SENSOR - 4.7L V-8

Courtesy of DAIMLERCHRYSLER CORP.

1 - ECT SENSOR

2 - MOUNTING BOLTS (2)

3 - MAP SENSOR

4 - INTAKE MANIFOLD

The MAP sensor is located on the front of the intake manifold. See Fig 1.

Fig 2: MAP SENSOR O-RING 3.7L/4.7L

Courtesy of DAIMLERCHRYSLER CORP.

1 - MAP SENSOR

2 - O-RING

An o-ring (2) seals the sensor to the intake manifold. See Fig 2.

Clean MAP sensor mounting hole at intake manifold.
Check MAP sensor o-ring seal for cuts or tears.
Position sensor into manifold.
Install MAP sensor mounting bolts (screws). (Refer to FUEL SYSTEM/FUEL DELIVERY - SPECIFICATIONS)
Connect electrical connector.