3.7L V-6

WARNING: This page is about a different car, the 2005 Dodge Pickup and 2005 Dodge Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: MAP SENSOR - 3.7L V-6

Courtesy of DAIMLERCHRYSLER CORP.

1 - MOUNTING SCREWS

2 - MAP SENSOR

3 - ECT SENSOR

4 - FRONT OF INTAKE MANIFOLD

The Manifold Absolute Pressure (MAP) sensor is mounted into the front of the intake manifold. See Fig 1.

Fig 2: MAP SENSOR O-RING 3.7L/4.7L

Courtesy of DAIMLERCHRYSLER CORP.

1 - MAP SENSOR

2 - O-RING

An o-ring (2) is used to seal the sensor to the intake manifold. See Fig 2.

Clean MAP sensor mounting hole at intake manifold.
Check MAP sensor o-ring seal for cuts or tears.
Position sensor into manifold.
Install MAP sensor mounting bolts (screws). (Refer to FUEL SYSTEM/FUEL DELIVERY - SPECIFICATIONS)
Connect electrical connector.