LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Unlimited >> Repair and Diagnosis >> Steering >> Steering Column >> Power Steering System >> Linkage >> Pitman Arm >> Installation

Pitman Arm: Installation

  1. Align and install the pitman arm on steering gear shaft.
  2. Install the washer and nut on the shaft and tighten the nut to 251 N.m (185 ft. lbs.).
  3. Install drag link ball stud to pitman arm. Install nut and tighten to 81 N.m (60 ft. lbs.). Install a new cotter pin.
scientia non olet · About LEMON Manuals