LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Unlimited >> Repair and Diagnosis >> Electrical >> Starter >> Starting System >> Starter Motor >> Installation >> 2.4L

Starter Motor: Installation: 2.4L

  1. Connect solenoid terminal wire harness connector to starter solenoid. Always support starter motor during this process. Do not let starter motor hang from wire harness.
  2. Install battery cable eyelet onto starter solenoid stud. Refer to Torque SPECIFICATIONS  .
  3. Position starter motor to transmission. Install and tighten 2 bolts. Refer to Torque SPECIFICATIONS  .
  4. Lower vehicle.
  5. Connect negative battery cable.
scientia non olet · About LEMON Manuals