LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler SE, 2.4 1, Automatic >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Suspension System >> Rear >> Lower Control Arm >> Installation

Lower Control Arm: Installation

  1. Position the lower suspension arm in the axle bracket and frame rail mount.
  2. Install the mounting bolts and finger tighten the nuts.
  3. Remove the supports and lower the vehicle.
  4. Tighten the lower suspension arm nuts to 203 N.m (150 ft. lbs.).
scientia non olet · About LEMON Manuals