LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 574 (Electronic Control Modules (Service Information)) >> Module-Final Drive Control >> Installation

Module-Final Drive Control: Installation

WARNING: This page is about a different car, the 2005 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing/Installing Final Drive Control Module
GC0027611Courtesy of DAIMLERCHRYSLER CORP.
  1. Place the park assist module (3) in its location on the mounting plate (2) and firmly snap into place.
  2. Connect the electrical connector (1).
    Fig 2: Lifting/Lowering Rear Seat
    GC0027612Courtesy of DAIMLERCHRYSLER CORP.
  3. Lower the rear seat back down into position.
  4. Connect the battery negative cable.
scientia non olet · About LEMON Manuals