LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 539 (Fuel System) >> Fuel Delivery >> Sensor-Fuel Level Sending Unit >> Installation

Sensor-Fuel Level Sending Unit: Installation

WARNING: This page is about a different car, the 2005 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removal & Installation Of Fuel Level Sending Unit
GC0027826Courtesy of DAIMLERCHRYSLER CORP.
  1. Noting the previously recorded pin positions, connect necessary wiring into electrical connectors, and into pump module.
  2. Position sending unit (3) to pump module. Slide unit on mounting tracks (6) and snap into place.
  3. Install fuel pump module. Refer to Fuel Pump Module REMOVAL /INSTALLATION .
scientia non olet · About LEMON Manuals