LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 528 (Power Distribution) >> Relay >> Installation

Section 528 (Power Distribution): Relay: Installation

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the relay to the proper receptacle.
  2. Align the relay terminals with the terminal cavities in the receptacle.
  3. Push firmly and evenly on the top of the relay until the terminals are fully seated in the terminal cavities in the receptacle.
  4. Connect the negative battery cable.
scientia non olet · About LEMON Manuals