Section 528 (Power Distribution): Relay: Description
WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
| 30 - COMMON FEED |
| 85 - COIL GROUND |
| 86 - COIL BATTERY |
| 87 - NORMALLY OPEN |
| 87A - NORMALLY CLOSED |
A relay is an electromechanical device that switches fused battery current to a electrical component when the ignition switch is turned to the Accessory or Run positions, or when controlled by a electronic module. The relays are located in the junction block or power distribution center. See Fig 1.
The relay is a International Standards Organization (ISO) relay. Relays conforming to the ISO specifications have common physical dimensions, current capacities, terminal patterns, and terminal functions.
A relay cannot be repaired or adjusted and, if faulty or damaged, it must be replaced.