Control Circuit Testing
WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
The starter control circuit components should be tested in the order in which they are listed, as follows:
- Starter Relay - Refer to DIAGNOSIS AND TESTING - STARTER RELAY .
- Starter Solenoid - Refer to STARTER MOTOR .
- Ignition Switch - Refer to IGNITION SWITCH and KEY CYLINDER .
- Clutch Pedal Position Switch - If equipped with manual transmission, refer to CLUTCH PEDAL POSITION SWITCH .
- Park/Neutral Position Switch - If equipped with automatic transmission, Refer to Park/Neutral Position Switch.
- Wire harnesses and connections - Refer to WIRING DIAGRAM INFORMATION