LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 519 (Message Systems) >> Ambient Temp Sensor >> Removal

Ambient Temp Sensor: Removal

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open hood, disconnect and isolate the negative battery cable.
  2. Remove the grille from the vehicle.
  3. Disconnect the ambient temperature sensor electrical connector.
  4. Remove the ambient temperature sensor retaining screw and remove the sensor from the vehicle.
scientia non olet · About LEMON Manuals