LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 423 (Electronic Control Modules (Service Information)) >> Module-Front Control >> Installation

Module-Front Control: Installation

WARNING: This page is about a different car, the 2005 Dodge Magnum and 2005 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: THE FRONT CONTROL MODULE LOCATION
GC0015857Courtesy of DAIMLERCHRYSLER CORP.
NOTE: A battery reconnect procedure must be performed anytime the battery has been disconnected. (Refer to ELECTRICAL/BATTERY SYSTEM - STANDARD PROCEDURE) .
  1. Position Front Control Module (FCM) and connect electrical connectors.
  2. Install and tighten mounting fasteners.
  3. Connect battery negative cable.
scientia non olet · About LEMON Manuals