Removal - Upstream 1/1 - 3.3/3.8L

WARNING: This page is about a different car, the 2004 Dodge Grand Caravan, 2004 Dodge Caravan, and 2004 Chrysler Town & Country. However, it is still accessible from the selected car via links, so may be relevant.

Remove battery, refer to BATTERY SYSTEM for more information .
Remove the battery tray, refer to BATTERY SYSTEM for more information .
Disconnect the speed control vacuum harness from servo.
Disconnect the electrical connector from servo.
Remove the speed control servo and bracket and reposition.
Use a socket such as the Snap-On® YA8875 or equivalent to remove the sensor (Fig 1).

Fig 1: Removing O2 Sensor 1/1
Courtesy of DAIMLERCHRYSLER CORP.
When the sensor is removed, the threads must be cleaned with an 18 mm X 1.5 + 6E tap. If using the original sensor, coat the threads with Loctite 771-64 anti-seize compound or equivalent.