LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Liberty Renegade, 4WD, Part Time, Standard >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Suspension System >> Front >> Lower Control Arm >> Installation

Lower Control Arm: Installation

  1. Install the lower control arm to the vehicle.
  2. Install the rear cam/pivot bolt.
  3. Install the front cam/pivot bolt.
  4. Install the lower ball joint nut. Tighten the nut to 81 N.m (60 ft.lbs.)
  5. Align the marks front and rear at the cam/pivot bolts and tighten the nuts. Tighten the nuts to 170 N.m (125 ft.lbs.)
  6. Install the stabilizer link bolt at the lower control arm. Tighten the nut to 136 N.m (100 ft.lbs.)
  7. Install the lower clevis bracket bolt at the lower control arm. Tighten the nut to 150 N.m (110 ft.lbs.)
  8. Install the tire and wheel assembly. (Refer to TIRES/WHEELS/WHEELS - STANDARD PROCEDURE) .
  9. Perform a full wheel alignment (Refer to SUSPENSION/WHEEL ALIGNMENT - STANDARD PROCEDURE) .
scientia non olet · About LEMON Manuals