LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Liberty Renegade, 4WD, Part Time, Standard >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel System >> Fuel Injection - 2.8L Diesel >> Boost Pressure Sensor >> Installation

Boost Pressure Sensor: Installation

  1. Install sensor and retaining bolts into cylinder head cover/intake manifold. See Figure. Torque to 5.4 N.m (48 in. lbs.).
  2. Connect sensor electrical connector. See Figure.
  3. Install engine cover and bracket assembly (Refer to INSTALLATION (2.4L) or INSTALLATION (2.8L) or INSTALLATION (3.7L)).
  4. Connect negative battery cable.
scientia non olet · About LEMON Manuals