Control Circuit Testing

The starter control circuit components should be tested in the order in which they are listed, as follows:

• Starter Relay  - Refer to DIAGNOSIS AND TESTING - STARTER RELAY .
• Starter Solenoid  - Refer to STARTER MOTOR  .
• Ignition Switch  - Refer to IGNITION SWITCH and KEY CYLINDER .
• Clutch Pedal Position Switch  - If equipped with manual transmission, refer to CLUTCH PEDAL POSITION SWITCH .
• Park/Neutral Position Switch  - If equipped with automatic transmission, Refer to Park/Neutral Position Switch.
• Wire harnesses and connections  - Refer to WIRING DIAGRAM INFORMATION