LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Liberty Renegade, 4WD, Part Time, Automatic >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Ignition Control >> Camshaft Position Sensor >> Removal >> 2.8L TURBODIESEL

2.8L TURBODIESEL

  1. Disconnect negative battery cable.
  2. Remove engine cover (Refer to ENGINE COVER - REMOVAL) .
  3. Disconnect CMP sensor electrical connector. See Fig 1.
  4. Remove CMP sensor retaining bolt and remove sensor from cylinder head cover/intake manifold. See Fig 1.
Fig 1: Camshaft Position (CMP) Sensor
GC0026415Courtesy of DAIMLERCHRYSLER CORP.
1 - CAMSHAFT POSITION (CMP) SENSOR
scientia non olet · About LEMON Manuals