LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Liberty Renegade, 4WD, Part Time, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Electronic Control Modules >> Heated Seat Module >> Removal

Heated Seat Module: Removal

  1. Working under the front seat cushion, remove the heated seat module from its mounting bracket by gently prying the module off of the two mounting pushpins. See Fig 1.
    Fig 1: Heated Seat Module Location
    GC0026402Courtesy of DAIMLERCHRYSLER CORP.
    1 - Front Seat Cushion
    2 - Heated Seat Module
    3 - Electrical Connector
  2. Disconnect the seat wire harness connector from the connector receptacle on the side of the heated seat module.
  3. Remove the heated seat module from the vehicle.
scientia non olet · About LEMON Manuals