LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Grand Cherokee Limited, 5.7 2 >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel Delivery >> Module-Fuel Pump >> Removal

Module-Fuel Pump: Removal

WARNING: THE FUEL SYSTEM IS UNDER A CONSTANT PRESSURE (EVEN WITH THE ENGINE OFF). BEFORE SERVICING THE FUEL PUMP MODULE, THE FUEL SYSTEM PRESSURE MUST BE RELEASED.
Fig 1: Removal & Installation Of Fuel Pump Module Location
GC0010080Courtesy of DAIMLERCHRYSLER CORP.
  1. Drain and remove fuel tank. Refer to Fuel Tank REMOVAL /INSTALLATION .
  2. Note rotational position of module before attempting removal. An indexing arrow is located on top of module for this purpose.
  3. Position Special Tool 9340 (3) into notches on outside edge of lock ring (5).
  4. Install 1/2 inch drive breaker bar (1) to tool 9340 (3).
  5. Rotate breaker bar counterclockwise to remove lock ring.
  6. Remove lock ring. The module will spring up slightly when lock ring is removed.
  7. Remove module from fuel tank. Be careful not to bend float arm while removing.
scientia non olet · About LEMON Manuals