LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Grand Cherokee Limited, 4.7 N, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 567 (Cruise Control Systems) >> Switch >> Installation

Section 567 (Cruise Control Systems): Switch: Installation

WARNING: This page is about a different car, the 2005 Jeep Wrangler. However, it is still accessible from the selected car via links, so may be relevant.
  1. Plug electrical connector into switch.
  2. Position switch to steering wheel.
  3. Install switch mounting screw and tighten to 1.5 N.m (14 in. lbs.) torque.
  4. Install airbag module. Refer to RESTRAINTS .
  5. Connect negative battery cable to battery.
scientia non olet · About LEMON Manuals