LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2004 >> Wrangler X, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (2.4L Engine) >> Vibration Damper >> Installation

Vibration Damper: Installation

WARNING: This page is about a different car, the 2003 Jeep Wrangler. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install crankshaft vibration damper using M12 1.75 x 150 mm bolt, washer, thrust bearing and nut from Special Tool 6792 (Fig 1).
    Fig 1: Installing Crankshaft Vibration Damper - Typical
    G02711962Courtesy of DAIMLERCHRYSLER CORP.
  2. Install crankshaft vibration damper bolt and tighten to 142 N.m (105 ft. lbs.).
  3. Install accessory drive belts. (Refer to DRIVE BELTS - INSTALLATION ).
scientia non olet · About LEMON Manuals