Left Front Fender: Installation

Transfer all related components. Replace harness retainers if damaged.

1. Position the fender on the vehicle.
2. Install the bolts attaching the fender to the grille.
3. Position the front end lighting wire harness into the retainers on the fender. Engage the retainers to secure.
4. Install the bolts attaching the fender to the HCU tray reinforcement bracket.
5. Install the bolts attaching the fender to the cowl.
6. If equipped, install the body side molding.
7. Route the fog lamp (if equipped), park lamp and side marker wire harness through the access hole in the fender well. Seat the grommet.
8. Engage the headlamp wire connector.
9. Install the HCU tray.
10. Position the HCU on the support tray and install the bolts.
11. Install EVAP canister.
12. Install horns. See HORN article.
13. Engage horn wire connectors.
14. Install the windshield washer reservoir.
15. Connect the negative terminal on the battery.