LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2004 >> Wrangler X, Standard >> Repair and Diagnosis >> Body & Frame >> Windows >> Body - Interior & Exterior >> Latch >> Installation

Body - Interior & Exterior: Latch: Installation

  1. Position the latch in the door.
  2. Connect the inside handle to latch rod.
  3. Install the screws attaching the latch to the door.
  4. Position the door weatherstrip in place, apply adhesive as necessary.
  5. Connect the outside handle to latch rod.
  6. Connect the lock knob to latch rod.
  7. Connect the lock cylinder to latch rod.
  8. Install trim panel. See TRIM PANEL .


  1. Position the latch in the door.
  2. Connect the inside handle to latch rod.
  3. Install the screws attaching the latch to the door.
  4. Position the door weatherstrip in place, apply adhesive as necessary.
  5. Connect the outside handle to latch rod.
  6. Connect the lock knob to latch rod.
  7. Connect the lock cylinder to latch rod.
  8. Install trim panel. See TRIM PANEL .
scientia non olet · About LEMON Manuals