LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2004 >> Wrangler X, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Switch >> Installation - Switch

Installation - Switch

  1. Plug electrical connector into switch.
  2. Position switch to steering wheel.
  3. Install switch mounting screw and tighten to 1.5 N.m (14 in. lbs.) torque.
  4. Install airbag module. See AIR BAG RESTRAINT SYSTEMS .
  5. Connect negative battery cable to battery.
scientia non olet · About LEMON Manuals