LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2004 >> Wrangler Sport, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Overhaul - 42RLE Automatic Transmission >> Transmission Range Sensor >> Installation

Transmission Range Sensor: Installation

  1. Install the TRS to the manual shaft. Make sure TRS locating pin rests in manual valve bore slot.
  2. Install the TRS/manual shaft retaining screw and torque to 5 N.m (45 in. lbs.) torque.
  3. Install the manual shaft seal.
  4. Install valve body to the transmission.
scientia non olet · About LEMON Manuals