LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2004 >> Wrangler Sport, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Overhaul - 42RLE Automatic Transmission >> Output Speed Sensor >> Installation

Output Speed Sensor: Installation

  1. Install the output speed sensor into the transmission case.
    NOTE: Before installing the speed sensor bolt, it will be necessary to replenish the sealing patch on the bolt using Mopar® Lock & Seal Adhesive.
  2. Install the bolt to hold the output speed sensor into the transmission case. Tighten the bolt to 9 N.m (80 in.lbs.).
  3. Install the wiring connector onto the output speed sensor
  4. Verify the transmission fluid level. Add fluid as necessary.
  5. Lower vehicle.
scientia non olet · About LEMON Manuals