LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2004 >> Wrangler SE, Automatic >> Repair and Diagnosis >> Steering >> Power Steering System >> Pump >> Installation >> Installation - 2.4L

Installation - 2.4L

  1. Install pulley on pump. See PULLEY .
  2. Install pump on the engine mounting bracket.
  3. Tighten pump bracket bolts to 47 N.m (35 ft. lbs.).
  4. Install 3 pump mounting bolts and tighten to 27 N.m (20 ft. lbs.).
  5. Install the pressure line on the pump and tighten to 28 N.m (21 ft. lbs.).
  6. Install return hoses on pump.
  7. Install drive belt. See SPECIFICATIONS & DRIVE BELT ROUTING article.
  8. Add power steering fluid, refer to STANDARD PROCEDURE - POWER STEERING PUMP - INITIAL OPERATION .
scientia non olet · About LEMON Manuals