LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2004 >> Wrangler SE, Automatic >> Repair and Diagnosis >> Steering >> Power Steering System >> Drag Link >> Removal

Drag Link: Removal

  1. Remove the cotter pins and nuts at the steering knuckle and drag link. See Figure.
  2. Remove the steering dampener ball stud from the drag link with a puller tool.
  3. Remove the drag link from the steering knuckle with a puller tool. Remove the same for tie rod and pitman arm.
  4. If necessary, loosen the end clamp bolts and remove the tie rod end from the link.
scientia non olet · About LEMON Manuals