LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2004 >> Wrangler SE, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Powertrain Diagnostic Procedures >> Starting >> *No Crank Condition >> Possible Causes

Possible Causes

  1. MECHANICAL CONDITION
  2. TRANSMISSION RANGE SENSOR
  3. BATTERY CIRCUIT RESISTANCE TOO HIGH
  4. CLUTCH PEDAL POSITION SWITCH
  5. (T141) FUSED IGNITION SWITCH OUTPUT CIRCUIT OPEN
  6. TRS T41 SENSE (P/N SENSE) CIRCUIT OPEN
  7. (T40) STARTER RELAY OUTPUT CIRCUIT OPEN
  8. (A2) FUSED B+ CIRCUIT OPEN
  9. STARTER
  10. STARTER RELAY
scientia non olet · About LEMON Manuals