LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2004 >> Wrangler SE, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Electronic Control Modules >> Controller Anti-Lock Brake >> Removal

Controller Anti-Lock Brake: Removal

  1. Remove the negative battery cable from the battery.
  2. Pull up on the CAB harness connector release and remove connector.
    Fig 1: Identifying Controller ABS Harness Connector Release
    G01741149Courtesy of DAIMLERCHRYSLER CORP.
  3. Remove the pump connector from the CAB.
  4. Remove the CAB mounting bolts.
  5. Remove the CAB from the HCU.
    Fig 2: Identifying Controller ABS & Hydraulic Control Unit
    G01741150Courtesy of DAIMLERCHRYSLER CORP.
scientia non olet · About LEMON Manuals