LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2004 >> Liberty Sport, 2.4 1, 4WD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (3.7L Engine) >> Valve Timing >> Standard Procedure >> Counter Balance Shaft Timing

Counter Balance Shaft Timing

WARNING: This page is about a different variant/trim than selected.
  1. Ensure that the engine is at TDC with both camshaft sprocket V6 marks in the 12 o'clock position.
  2. Look down the left cylinder head chain cavity. The timing dot on the counter balance shaft drive gear should be in the 6 o'clock position.
Fig 1: Identifying Counterbalance Shaft Alignment Marks
G01744810Courtesy of DAIMLERCHRYSLER CORP.
scientia non olet · About LEMON Manuals