LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2004 >> Liberty Sport, 2.4 1, 4WD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (3.7L Engine) >> Oil Pressure Sensor/Switch >> Installation

Oil Pressure Sensor/Switch: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Install oil pressure sender.
  2. Connect oil pressure sender wire.
  3. Install front splash shield.
  4. Lower vehicle.
  5. Connect the negative battery cable.
scientia non olet · About LEMON Manuals