LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2004 >> Liberty Renegade, 4WD, Part Time, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 87 (Audio System) >> Cd Changer >> Installation

Cd Changer: Installation

WARNING: This page is about a different car, the 2003 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the CD Changer to the vehicle.
  2. Install the mounting nuts. Tighten to 11.8 N.m (104 in. lbs.).
  3. Connect the wire harness connector.
  4. Install the right rear quarter trim panel (Refer to INTERIOR ).
  5. Connect the battery negative cable.