Removal - 4.0L
WARNING: This page is about a different car, the 2004 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
The MAP sensor is mounted to the side of the throttle body (Fig 1
). An L-shaped rubber fitting is used to connect the MAP sensor to throttle body (Fig 1
).
Courtesy of DAIMLERCHRYSLER CORP.
- Remove air cleaner duct and air resonator box at throttle body.
- Remove MAP sensor mounting bolt (screw) (Fig 1
).
- While removing MAP sensor, slide the rubber L-shaped fitting (Fig 1
) from the throttle body.
- Remove rubber L-shaped fitting from MAP sensor.