Section 71 (Audio System & Video System): Speaker: Installation: Front
WARNING: This page is about a different car, the 2004 Jeep Wrangler. However, it is still accessible from the selected car via links, so may be relevant.
- Connect the speaker wire connector to the speaker.
- Position the speaker to the instrument panel.
- Install the four speaker retaining screws. Tighten the screws to 1.1 N.m (10.in.lbs).
- Install the speaker bezel to the instrument panel. Tighten the screws to 2.2 N.m (20 in. lbs.).
- Connect the battery negative cable.