Center Console: Removal
WARNING: This page is about a different car, the 2004 Jeep Wrangler. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the cup holder, if equipped.
- On full console models remove the trim disc from the bottom of the cup holder.
- Remove the automatic transmission shift bezel, if equipped.
- Using a Trim Stick C-4755 or equivalent, remove the air bag deactivation switch and disconnect the electrical connector, if equipped.
- Remove the bolt(s) attaching the console to the floor pan.
- Shift transfer case to four low position.
- Shift transmission to L (2nd gear for manual transmission) and remove the console assembly.