Throttle Position Sensor
WARNING: This page is about a different car, the 2003 Jeep Wrangler, 2003 Jeep Liberty, and 2003 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
TP sensor is not adjustable. Output voltage (center terminal of TP sensor) should be approximately .96 volt at closed throttle (idle) and approximately 4.49 volts at Wide Open Throttle (WOT). Voltage should increase gradually and smoothly as throttle is slowly opened from idle to WOT. TP sensor must be replaced if it is out of range.