Front Seat: Installation
WARNING: This page is about a different car, the 2004 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
- Position seat on floor pan.
- If equipped, connect power seat wire harness connector.
- Install rear bolts attaching seat to floor pan and tighten to 40 N.m (30 ft. lbs.).
- If equipped, install cover on seat track.
- Move seat to full rearward position.
- Install front bolts attaching seat to floor pan and tighten to 40 N.m (30 ft. lbs.).