LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2004 >> Liberty Limited, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 110 (Power Sunroof System) >> Module Assembly >> Installation

Module Assembly: Installation

WARNING: This page is about a different car, the 2003 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ensure glass panel in the fully closed position.
  2. Raise rear end of sunroof module assembly and guide into position and start fasteners.
  3. Tighten the fasteners to 9 N.m (80 in. lbs.).
  4. Connect the drain tubes.
  5. Connect wire harness.
  6. Install the headliner. (Refer to INTERIOR )
  7. Install the opening trim lace. (Refer to INSTALLATION  )
  8. Connect battery negative cable.
  9. Test sunroof operation, adjust as necessary. (Refer to ADJUSTMENTS  )
scientia non olet · About LEMON Manuals