Diagnosis And Testing - Control Switch
WARNING: This page is about a different car, the 2003 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
The following test will determine if the sunroof control switch is operating properly.
- Remove the overhead console from the headliner (Refer to OVERHEAD CONSOLE ).
- Remove the sunroof control switch from the overhead console (Refer to REMOVAL ).
- Using an ohmmeter, test the switch terminals for proper continuity using the CONTROL SWITCH TERMINALS CONTINUITY REFERENCE table. If any of the terminals do not show proper continuity, replace the sunroof control switch.
CONTROL SWITCH TERMINALS CONTINUITY REFERENCE
| SWITCH POSITION (DEPRESSED) | CONTINUITY BETWEEN TERMINALS |
|---|---|
| VENT (V) | 3, 4 |
| OPEN (AUTO) | 1, 4 |
| CLOSE | 2, 4 |