LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2004 >> Liberty Limited, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 108 (Interior) >> Quarter Trim Panel >> Installation

Quarter Trim Panel: Installation

WARNING: This page is about a different car, the 2003 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the 12v power supply electrical connector, if equipped.
  2. Install the storage cover.
  3. Install the belt access panel.
  4. Install the seat belt anchor and pivot. (Refer to AIR BAG RESTRAINT SYSTEMS )
  5. Install the hook pin type connector.
  6. Position the rear sill plate and seat the retaining clips.
  7. Position the rear header trim and seat the retaining clips.
scientia non olet · About LEMON Manuals