LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2004 >> Liberty Limited, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 106 (Exterior) >> Radiator CROSSMEMBER >> Installation

Radiator CROSSMEMBER: Installation

WARNING: This page is about a different car, the 2003 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the crossmember and install the bolts.
  2. Tighten the bolts to 10 N.m (85 in. lbs.).
  3. Install the hood latch support and install the bolts.
  4. Tighten the bolts to 10 N.m (85 in. lbs.).
  5. Install new rivets attaching the hood latch support to the crossmember.
  6. Install the hood latch. (Refer to HOOD )
  7. Install the grille. (Refer to INSTALLATION  )
  8. Install a new rivet securing the washer bottle to the crossmember.
scientia non olet · About LEMON Manuals