LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2004 >> Liberty Limited, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 105 (Swing Gate) >> Swing Gate >> Installation

Swing Gate: Installation

WARNING: This page is about a different car, the 2003 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the swing gate and install the bolts.
  2. Tighten the bolts to 31 N.m (23 ft. lbs.).
  3. Adjust the swing gate as needed adding 3 mm on the right side to compensate for sag after the spare tire is installed. (Refer to ADJUSTMENTS  ).
  4. Connect the wire harness electrical connector.
  5. Connect the check strap. (Refer to INSTALLATION  ).
  6. Install the quarter trim panel. (Refer to INTERIOR ).
  7. Install the spare tire. (Refer to TIRES/WHEELS ).
scientia non olet · About LEMON Manuals