LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2004 >> Liberty Limited, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 105 (Swing Gate) >> Lock Cylinder >> Installation

Lock Cylinder: Installation

WARNING: This page is about a different car, the 2003 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the lock cylinder.
  2. Install the screw and tighten to 6 N.m (50 in. lbs.).
  3. Install the lock cylinder switch and retaining clip.
  4. Install the exterior handle. (Refer to INSTALLATION  ).
scientia non olet · About LEMON Manuals