LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2004 >> Liberty Limited, RWD >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Vehicle Theft Security System >> Exterior Handle >> Installation

Exterior Handle: Installation

  1. Position the handle on the door and slide fully toward the rear of the door.
  2. Install the nuts and tighten to 6 N.m (55 in. lbs.).
  3. Install the screws and tighten to 6 N.m (55 in. lbs.).
  4. Connect the handle rod at the handle and the key cylinder rod at the latch.
  5. Connect the lock switch electrical connector, if equipped.
  6. Install the door glass. See DOOR GLASS  .
scientia non olet · About LEMON Manuals