LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2004 >> Liberty Limited, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 150 (Power Liftgate System) >> Latch - Control Assembly >> Installation

Latch - Control Assembly: Installation

WARNING: This page is about a different car, the 2004 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the control assembly.
  2. Install the three bolts and tighten to 10 N.m (90 in. lbs.).
  3. Connect the outside handle link.
  4. Connect the latch cables.
  5. Connect the electrical connector.
  6. Adjust the outside handle. (Refer to ADJUSTMENTS  )
  7. Adjust the latch cables. (Refer to ADJUSTMENTS  )
  8. Install the liftgate insulator pad. (Refer to LIFTGATE INSULATOR PAD  )
scientia non olet · About LEMON Manuals