LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2004 >> Liberty Limited, 4WD, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Emissions Control System >> Vapor Canister >> Installation

Vapor Canister: Installation

  1. Slide 2 canister mounting pins into mounting bracket.
  2. Install canister-to-mounting bracket bolt.
  3. Position canister and bracket assembly to body.
  4. Install 2 mounting bracket bolts. Tighten to 47 N.m (35 ft. lbs.) torque.
  5. Connect vacuum hoses/lines at EVAP canister.
  6. Lower vehicle.
scientia non olet · About LEMON Manuals