LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2004 >> Liberty Limited, 4WD, Automatic >> Repair and Diagnosis >> Engine Mechanical >> Exhaust System >> Catalytic Converter >> Removal >> Notes

Catalytic Converter: Removal: Notes

WARNING: IF TORCHES ARE USED WHEN WORKING ON THE EXHAUST SYSTEM, DO NOT ALLOW THE FLAME NEAR THE FUEL LINES.
  1. Raise and support the vehicle.
  2. Saturate the bolts and nuts with heat valve lubricant. Allow 5 minutes for penetration.
  3. Remove the bolts from the crossover pipe to the catalytic converter connection.
  4. Disconnect oxygen sensor wiring.
  5. Loosen and remove the nuts from the clamp that hold the catalytic converter to the exhaust pipe flange connection.
scientia non olet · About LEMON Manuals